Cobra Colour Control 12 Bedienungsanleitung PDF herunterladen (Seite 8)

Each fixture takes up 5 DMX Channels (See Above)

The controller is a fairly basic 24 channel.

So you have a cable from the controller to the first fixture cable from first to second and so on, the

last light has a DMX terminator plugged in.

Fixture 1 would be set to DMX address:

1 dipswitch number 1 on.

Fixture 2 would be set to DMX address:

6 dipswitch numbers 2 & 3 on.

Fixture 3 would be set to DMX address:

11 dipswitch numbers 1, 2 & 4 on.

Fixture 4 would be set to DMX address:

16 dipswitch number 5 on.

We would recommend you to fully read manuals for your light and controller as some controllers tell

you what each fixture address needs to be, and some lights need other settings changed to make

them work.

When setting address you need to make sure fixtures don’t overlap from one to the next.

You can set 2 fixtures to the same address, and as long as they are the same fixture (i.e. same

channel layout) they will then do the same as each other.

1 2 3 4 5 6 7 8 9

Keine Kommentare

Cobra Colour Control 12 Bedienungsanleitung Seite 8