Cobra CPI1500 Betriebsanleitung PDF herunterladen (Seite 10)

Nothing comes close to a Cobra

™

English

Turning Your Inverter On or Off

•

Be sure to have your power inverter properly installed

before attempting to turn the unit On (see “Installation”

page 6).

To Turn the Power Inverter On:

1. If a DC power supply is being used as the power

source, switch it On.

2. On the left side panel, switch the On/Off Switch to On.

The inverter is now ready to deliver AC power to your loads.

If several loads are to be operated by the inverter, turn

them On separately, after the inverter has been turned On.

This will ensure that the inverter does not have to deliver

the starting currents required for all the loads at once.

To Turn the Power Inverter Off:

1. On the left side panel, switch the On/Off Switch to Off.

NOTE The On/Off Switch turns the control circuit

in the inverter On and Off. It does not disconnect

power from the inverter.

When the switch is in the Off position, the inverter

draws no current from the battery. When it’s in the

On position, but no power is being supplied to the

load, the inverter draws less than 500 milliamperes

from the battery. This is low current draw. It would

take more than a week to discharge a 100 ampere-

hour battery at this rate depending on the age of

the battery.

Remote On/Off Switch (not included)

•

An optional Remote On/Off Switch (not included) can be

connected to the Remote Jack allowing you to turn the

Cobra

CPI 1500 inverter On or Off from a convenient location

when the inverter is installed in an out of reach location.

Power On & Off

Operation

Remote On/Off Switch

Operation

On/Off Switch to On

Remote Switch

Remote Jack

On/Off Switch to Off

1 2 ... 5 6 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Cobra CPI1500 Betriebsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Netzteile und Wechselrichter Cobra CPI1500