Cobra 29LTDDELE Spezifikationen PDF herunterladen (Seite 12)

Operation

12

Note

The reading will be slightly

higher on Channels 1 and 40

compared to Channel 20.

Note

When switched to SWR position

the meter needle should ideally

be as far to the left as possible.

Anything over 3 is not

acceptable.The antenna

indicator will light. A slight

antenna height adjustment

(higher or lower) may be

required. Repeat relcalibration

steps.

Repeat the same steps two through five

on Channel 1 and 40.This will check SWR for

all channels.

6

While still holding down the mic button, set

the S/RF SWR CAL switch to the SWR position,

to read the SWR reading.

5

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

Kommentare zu diesen Handbüchern

Keine Kommentare