Cobra Colour Control 12 Bedienungsanleitung PDF herunterladen (Seite 3)

Protection from Injury and Damage:

1. Do not attempt to modify this unit.

2. Always install the unit in a suitable location where vibrations to the unit are avoided.

3. Check this unit matches the mains voltage and frequency before plugging it in to your mains

socket.

4. If any liquids or objects have entered the unit, switch it off immediately and consult a qualified

engineer.

5. In the event of malfunction or damage to the mains cable, disconnect from the mains supply

immediately and consult a qualified engineer.

6. All parts should be replaced with genuine spare parts and carried out by a qualified engineer.

Contents & Unpacking:

1. The box should contain Cobra Colour Control 48, power supply and user manual.

2. If you suspect any damage or missing parts, please contact your dealer immediately.

Specifications:

Name: Colour Control 48

Code: Control 48

Power supply: DC 12v 500mA min.

Power consumption: 20 watts

Output: DMX 512 (3-pin)

Audio Input: 100mV ~ 1Vpp

Dimensions: 483 x 264 x 80mm

Weight: 4.3kg

Features

The Colour Control 12 is DMX 48-channel controller suitable for dimmer packs, LED lights and effect

lights.

Features Include

1.Controls up to 48 channels.

2.Scenes/chases can be stored.

3.Speed and fade can be used after programming.

4.Controller can be used in 24-channel double pre-set mode.

5.Chases and scenes can be mixed in playback.

6.A chase can have up to 999 steps.

7.3-pin DMX output socket.

8.Audio input or built in mic, for playback of chases to the bass beat.

9.Midi control over some features.

Note: A knowledge of DMX is required to make full use of this controller and all of its features

The controller will automatically begin sending the FILE DUMP once the mode has been selected.

Therefore be sure that the other device has previously been set up to accept the transfer.

During FILE DUMP all other operations will cease to function.

If errors or power failure occurs, FILE DUMP will be interrupted and stop

1 2 3 4 5 6 7 8 ... 18 19

Keine Kommentare

Cobra Colour Control 12 Bedienungsanleitung Seite 3