SPECIAL PROGRAMMING SECTION:
Change Master Code. EXAMPLE:
Change from 1234 (factory default)
to 3131.
Hold # depressed until Yellow
LED blinks continuously.
Enter current Master Code
(1234#). Yellow LED blinks.
Enter Program Command Code
(PCC). (51#) Yellow LED blinks
Enter User Number (1#) Yellow
LED blinks
Enter New Master Code
(3131#). Note: Master codes must
be 4-7 digits Yellow LED blinks
Re-enter New Master Code
(3131#) Green LED Blinks
If Master Code is unknown,
Red LED will flash instead of Yellow. Refer to step 3.
User Programming Commands.
These Program Modes and User Codes can be programmed
with the Supervisor Code (SC) or the Master Code (MC)
Enter Master Code: # (Hold), MC#, 51#, 1#, (4-7 Digits)#, (4-7
Digits)#
Enter Emergency Code: # (Hold), MC#, 51#, 2#, (4-7 Digits)#,
(4-7 Digits)#
Enter Supervisor Code: # (Hold), MC#, 51#, 3#, (4-7 Digits)#,
(4-7 Digits)#
Enter Lockout Code: # (Hold), MC#, 51#, 4#, (4-7 Digits)#, (4-7
Digits)#
Enter Passage Code: # (Hold), MC#, 51#, 5#, (4-7 Digits)#, (4-7
Digits)#
Enter Normal User Code: # (Hold) MC#, 51#, (6 through 99)#,
(2-7 Digits) #, (2-7 Digits)#
To delete all users (Deletes all codes back to defaults): #Hold, MC#,
60#, 60#
To delete individual User Code: #Hold, MC#, 61# (6 through 99)#
To delete block Of Users: #Hold, MC#, 62#, 1st LOC #, 2nd LOC #
User Setting Reset: resets all programming commands to default.
#Hold, MC#, 72#, 72#
TO RESET PROGRAMMING TO FACTORY DEFAULT:
To reset programming to factory default (master code
unknown), Remove inside escutcheon. Press and hold “#”
button until yellow LED blinks. Press PRGM button at top of
controller.
Enter 51#. Yellow LED blinks. Enter 1 #. Yellow LED blinks again.
Enter new master code #. Yellow LED blinks. Re-enter new Master
Code #. Yellow LED blinks. Green LED blinks. Lock back to default.
YALE eBOSS
Categories Yale eBoss
ANSI/BHMA A156.2 Grade 1
Cylindrical Grade
UL/ULC fire rating 3 hours ‘A’ label doors
Clutched Lever Free wheeling only on
Cylindrical and Exit Trim
Available as Cyl/Mort/ET
Lever Handing Non-handed
Field reversible? Yes
Key Override: Yes
Optional Yes
Keypad Layout Telephone-style 12-button
Button Construction Stainless steel
Code Hierarchy Master, Supervisor,
User, Emergency, Lockout,
Passage Code
Master Code
Programming
4-7 digits plus *,
No access
Factory Default Codes Master Code 1-2-3-4.
Emergency Code 4-3-2-1
Notes: Factory master and emergency preset codes
must change before codes can be programmed
Sub-master Codes Supervisor, Lock-out, Passage
Number Of Digits 4-7 plus *
User Codes up to 94, 4-7 digits plus *
Single use code n/a
Successful Entry Green LED flash once per
second upon entry of a
correct User code
User code groups n/a
Levels of access Code Required Passage
Lock-out/down
Override
Supervisor and Emergency
Codes
Programming Capabilities
Master Code All programming
Supervisor Code All programming except to
change Master Code
Lock-out Code Enables/disables lock-out for
User Codes
Passage Code Enables/disables passage
mode
Emergency Code Unlocks lock for ten seconds
handicap
Anti-Tamper (Default) After 3 successive invalid
entries, 1 long red flash and
tone. 10-sec keypad lockout, 1
short beep per sec
Weatherized model Weather resistant keypad
Battery Life 100,000 cycles
Low Batteries Warning First, four beeps allows entry
Blackout mode four beeps
four tones
Lock operates only with
Supervisor and Emergency
Codes
Batteries Six AA Alkaline
Battery Location Inside beneath battery
escutcheon
Replacement Info Non-volatile memory
www.locksmithledger.com [11/10] LOCKSMITH LEDGER — 57
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern