
2
User Manual
COBRA Colour Control 8
Dear Customer,
Thank you for purchasing the COBRA Colour Control 8. Cobra is one of the leading manufacturers of
professional equipment and has decades of experience in design and production.
To meet all your requirements, this unit has been designed and built to the highest standards so you can be
assured you have made a good investment.
Please read this manual fully for your safety and to take full advantage of the COBRA Colour Control 8
features.
Product Description:
The COBRA Colour Control 8 is a DMX controller suitable for up to 8 LED par cans with up to 8 DMX channels
each. The Colour Control 8 will allow scenes and chases to be stored.
General Advice:
1. Read manual completely before using this product.
2. Keep manual for future reference.
3. Carry and transport this product with care as hard knocks or dropping it may result in mechanical or
electrical damage.
4. The manufacturer takes no responsibility for injury or damage caused as a result of not following the
manual provided.
Protection from Electric Shock:
1. Do not connect the AC power plug to the unit before connecting your lights.
2. Only connect this unit to a mains socket with suitable trip protection and RCD protection.
3. Never pull the mains cable to disconnect from the mains socket – always pull by the mains plug.
4. Always disconnect the unit from the mains before cleaning. Cleaning should be carried out with a soft,
dry cloth.
5. Do not expose this unit to any liquids. Do not operate near exposed water or high humidity.
6. Choose a suitable route for mains cables, ensuring the mains lead is not a trip hazard or at risk from
being crushed.
7. Do not open unit to service. There are no user serviceable parts inside the unit and this will void your
warranty.
Protection from Fire:
1. Do not place near sources of heat.
2. Do not block any ventilation holes.
3. Check your AC wall socket will take the load you are applying to avoid any overloading.
4. Make sure you are using the correct voltage DC power supply, set to the correct polarity.
Kommentare zu diesen Handbüchern