8
Channel Assignment:
1. Press and hold the Patch/Down button for 3 seconds. The Patch LED will light up red.
2. Choose channel range with the SPEED fader. Example: 1, 17, 33, 49 etc. Range 17: Start at 17 and stop at 32.
3. Choose a DMX channel with the FADE fader.
4. Press the fixture button you desire. The Fixture LED will light up blue. You can choose 8 different fixtures.
5. Now press and release the flash button from the fader you want to patch the DMX channel to. Example:
This figure shows that DMX channel 49 is patched to the RED fader of fixture 1
6. Press Patch button for 3 seconds to exit Patch Mode.
Factory Reset:
1. First turn off the device.
2. Now press and hold the Record button and Tap Sync button together.
3. Now switch on the device.
4. The display will show: LED Commander V1.0
Welcome to Use
5. After 2 seconds the fixture LEDs 4 and 8 will flash once, indicating the LED Commander is back to factory
default settings.
**Saved scenes and chases will be lost**
After the factory reset, the fixture is auto patched:
Fixture 1 Fixture 2 Fixture 3 Fixture 4
Red CH1 Red CH9 Red CH17 Red CH57
Green CH2 Green CH10 Green CH18 Green CH58
Blue CH3 Blue CH11 Blue CH19 Blue CH59
Colour CH4 Colour CH12 Colour CH20 Colour CH60
Strobe CH5 Strobe CH13 Strobe CH21 Strobe CH61
Sound CH6 Sound CH14 Sound CH22 Sound CH62
Dimmer CH7 Dimmer CH15 Dimmer CH23 Dimmer CH63
Master CH8 Master CH16 Master CH24 Master CH64
AUX Buttons:
The AUX button can be used for fog machines and strobes. AUX 1 is for DMX address 65 and AUX 2 is for
DMX address 66. When pressed they will put that DMX channel fully on.
Patch More than One Channel to AUX:
1. Press and hold the Patch/Down button for 3 seconds. The Patch LED will light up red.
2. Use the Speed and Fade faders to select the DMX channel you want to patch.
3. Assign the DMX channel by pressing the AUX1 or AUX2 button.
4. Press and hold Patch/Down button for 3 seconds to exit Patch Mode. Repeat steps 2 and 3 as much as
you desire.
**AUX channels will fade when the Fade time is set on the Fade slider. The Speed fader will have no effect
on the AUX channels **
Patch More than 1 DMX Channel to a Fixture Slider:
1. Press and hold Patch/Down button for 3 seconds. The Patch LED will light up red.
2. Press the fixture button with the DMX channel you wish to patch.
3. By using the Fade slider & Speed slider, scroll to the DMX address you wish to patch to a slider.
4. Press the channel button you wish to patch. i.e. red.
5. Repeat steps 3 & 4 as much as you desire.
6. Hold Patch/Down for 3 seconds to exit Patch Mode.
Patch DMX:049
Fixture 01 Red
(19 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern