Cobra Colour Control 12 Bedienungsanleitung Seite 11

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 12
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 10
11
indicating MIDI IN channel is set.
3. Whilst holding down record, tap the Rec Exit button to exit MIDI settings.
Note:
This is the channel that the controller will receive MIDI note command.
Note:
When working with MIDI notes 22-93, you may simulate a fader’s increase and decrease by adjusting the
velocity of the note.
Setting MIDI OUT:
1. Whilst holding down the Record button, simultaneously tap the Flash button #2 three times. The display
reads MIDI CHANNEL OUT to indicate channel setup is available.
2. Select the MIDI control (1-16) by tapping Flash buttons #1-16. The relevant channel LED lights indicating
MIDI OUT channel is set.
3. Whilst holding down Record, tap the Rec Exit button to exit MIDI setting.
Note:
This is the channel that the controller will transmit MIDI note commands.
Receiving MIDI File Dump:
1. Whilst holding down the Record button, simultaneously tap the flash button #3 three times. The display
reads MIDI FILEDUMP RECEIVING 000% when the device is in the correct mode.
2. When holding down Record, tap the Rec Exit button to exit the MIDI setting.
Notes:
This is the process of copying your entire show to another Colour Controller. This will not work with any other
device.
This process can take several minutes to complete.
The controller will automatically begin sending the FILE DUMP once the mode has been selected. Therefore
be sure that the other device has previously been set up to receive the transfer.
During FILE DUMP, all other operations will cease to function.
If error or power failure occurs, FILE DUMP will be interrupted and stop.
Sending MIDI File Dump:
1. Whilst holding down the Record button, simultaneously tap the Flash button #3 four times. The display
will read MIDI FILEDUMP SENDING 000% when the device is in the correct mode.
2. When holding down Record, tap the Rec Exit button to exit the MIDI setting.
MIDI note Function (TURN ON/OFF)
27-69 Turn on or off program 1-48
79-93 Activate channel 1-24
94 FULL-ON
95 DARK (momentary blackout)
96 HOLD
97 Turn on or off AUDIO
98 NODE: CHASE <> SCENE
99 MODE: 1-12A_1-12B
100 MODE: 1-24A
101 Step
102 BLACKOUT
Seitenansicht 10
1 2 ... 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare