Cobra Colour Control 12 Bedienungsanleitung PDF herunterladen (Seite 3)

Protection from Injury & Damage:

1. Never try to modify this unit.

2. Always install the unit in a suitable location where vibrations to the unit are avoided.

3. Check the unit matches the mains voltage and frequency before plugging it in to your mains socket.

4. If any liquids or objects have entered the unit, switch it off immediately and consult a qualified

engineer.

5. If the unit malfunctions or there is any damage to the mains cable, disconnect immediately and consult

a qualified engineer.

6. All parts should be replaced with genuine spare parts and carried out by a qualified engineer.

Unpacking:

1. The box should contain Colour Control 24, DC power supply and user manual.

2. If there is any damage or missing parts, please contact your dealer immediately.

Specifications:

Name: Colour Control 24.

Code: Control 24.

Power Supply: DC 12v 500mA min.

Power Consumption: 20 watts.

Output: DMX 512 (3-pin & 5-pin XLR)

Audio Input: 100mV ~ 1Vpp

Dimensions: 483 x 264 x 100mm

Weight: 4.7kg

Features:

The Colour Control 24 is a DMX 48-channel controller suitable for dimmer packs, LED lights and effects lights.

Features Include:

1. Controls up to 48 channels (24 on page A, 24 on page B).

2. 96 scenes/chases can be stored.

3. Speed and fade can be used after programming.

4. Controller can be used in 24-channel double pre-set mode.

5. Chases and scenes can be mixed in playback.

6. A chase can have up to 1000 steps.

7. 5-pin & 3-pin output sockets.

8. 19” rack mountable (6u).

9. Channel sliders can be assigned to different DMX addresses.

10. 2 AUX switches/knobs for DMX foggers or strobes. These can be assigned to any DMX address between 1 & 48.

**Note: A knowledge of DMX is required to fully use this controller**

1 2 3 4 5 6 7 8 ... 11 12

Keine Kommentare

Cobra Colour Control 12 Bedienungsanleitung Seite 3