Cobra Colour Control 12 Bedienungsanleitung PDF herunterladen (Seite 5)

23. Audio/Page A_B. Audio activates audio sync of chase; Page A_B switches the channel faders

between 1-24 mode and 25-48 mode. Press and hold Record and Page A_B to switch

between the 2 channel pages.

24. Step. Used to go to the next step when the Speed slider is set on Show mode or Edit mode.

25. Hold. Used to momentarily maintain current step in a program.

26. Master A Button. Brings channel 1-24 to full when slider A is at minimum.

27. Master A. Adjusts overall intensity.

28. Blind. Takes a channel out of a program temporarily in Chase <> Scene mode.

29. Park. Used to select Single/Mix Chase, bring Channel 1-24 (37-48) to full of current setting.

30. Home. Used to deactivate the Blind on a given channel.

31. Master B. adjusts overall intensity.

32. Tap Sync. Repeatedly tapping this button will establish the chase speed.

33. Fade Fader. Adjusts the fade-in, fade-out and cross-fade times.

34. Full On. Momentarily brings all channels (1-48) to full intensity.

35. Blackout. Used to kill all output, with exception of Full On.

36. Speed Fader. Used to adjust the speed of scenes/chases running.

37. Audio Level Fader. Adjusts the audio sensitivity when in Audio trigger mode of scenes.

Controller Rear:

38. 3-pin DMX OUT.

39. 5-pin DMX OUT.

40. Polarity Switch.

41. Midi Thru.

42. Midi Out.

43. Midi In.

44. Audio Input. This RCA accepts a fine level audio input signal ranged from 100mV to 1Vpp.

45. Remote Input. Blackout and full can be controlled by a remote control with a ¼ inch jack stereo

connection.

46. DC Input. Connect a 12dc, 500mA min. adaptor.

Common Terms:

The following are common terms used in intelligent light programming

• Blackout is a state where all lighting fixtures light output are set to 0 or off, usually on a temporary basis.

• DMX-512 is an industry standard digital communication protocol used in entertainment lighting

equipment.

38 39 40 41 42 43 44 45 46

Fig 2

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Cobra Colour Control 12 Bedienungsanleitung Seite 5